Manufactured from 2012 to 2018
High-end solid-state preamplifier
The Nagra MELODY solid-state preamplifier establishes new levels in terms of sonic transparency and exactitude. Everything within its high precision electronics contributes towards musical realism respecting the slightest detail and nuance. The Nagra MELODY maintains the traditional ergonomics and Nagra look, with the modulometer on the front face to indicate the output signal level.
Circuit design
Connectivity
Phono option
Power supply
Technical specification
ELECTRONICS
Input impedance: | > 75 K Ohms |
Output impedance: | 47 Ohms on RCA 100 Ohms on XLR |
Frequency response: | 10 Hz – 50 kHz (+0 / -1 dB) |
Signal to noise ratio: | > 100 dB (ASA A) Ref 1 V |
Dynamic range: | > 110 dB Gain at +12 dB |
Minimum input level to reach 0 dB (meter): | 0.25 V rms Gain at + 12 dB |
Maximum input level to reach 0 dB (meter): | > 25 V rms Gain at 0 dB |
Total harmonic distortion (THD): | <0.02 % @ 1 kHz, 1 V rms without load |
Crosstalk: | > 75 dB |
GENERAL
MELODY consumption: | 230 V 30 mA 12 V 140 mA Standby <10 mW |
Power supply: | 115 V or 230 V AC Factory set |
Dimensions: | 310 x 254 x 76 mm 12.2 x 10 x 3 inches |
Weight: | 3.2 Kg – 7 lbs MELODY unit alone |
PHOTO OPINION
Sensitivity High: | MM 2.2 mV rms |
MC 0.67 mV rms | |
Ref. 1 V rms output | |
Sensitivity Low: | MM 16 mV |
MC 4.4 mV | |
Ref. 1 V rms output | |
Signal-to-noise ratio: | > 75 dB (ASA A) Ref. 1 V rms |
Crosstalk: | > 70 dB @ 1 kHz |
Distortion: | < 0.02 % |
@ 1 kHz, 1 V rms | |
without load | |
+ 1 / 0 dB | |
Bandwidth: | 20 Hz – 50 kHz |
Accessories
VFS: Vibration Free Support
CLASSIC PSU or MPS: Multiple Power Supply
ACPS II : Single power supply
Other products to discover
NAGRAニュースレター:最新情報をお見逃しなく
Nagraの最新ニュースおよび限定コンテンツをお届けします。